This page describes the syntax and how to use the**** update command.
To go the update command, press Update on the console.
Description
Section titled “Description”With the update command, you can update
- groups
- presets
- cues
Syntax
Section titled “Syntax”Update
Example 1
Section titled “Example 1”Let´s assume, you edited a group 1 by using the edit command, and now you will apply the changes to group 1.
An indicator that the update function is available is the flashing Update key on the console.
Press Update Please.
The console asks, if you want to update Group 1. Tap Ok.
Group 1 is updated.
Example 2
Section titled “Example 2”Let´s assume, you edited preset 1 by using the edit command, and now you will apply the changes to preset 1.
Press Update Please.
The console asks, if you want to update Preset 1. Tap Ok.
Preset 1 is updated.
Example 3
Section titled “Example 3”Let´s assume, you have some values in the programmer and you will update preset 1 to these values.
There are two ways to do this:
a) Press Update and tap at preset 1 in the preset pools view.
b) Press Update Preset 1 Please.
Preset 1 is updated with the values in the programmer.
After an update, the fixtures sheet view displays the name of the preset.
To see the values stored in the preset, tap and hold the preset tile.
Example 4
Section titled “Example 4”Let´s assume, you will update cue 2 on executor 2 with the values in the programmer.
There are three ways to do this:
a) Press Update 2 (=Cue 2) Exec 2 Please.
b) Press Update 2 (=Cue 2) and press executor button 2 
.
c) Press Update 2 (=Cue 2) and tap at executor 2 in the executor bar window.
If cue 2 on executor 2 is your current active cue, press Update and the executor button 2 .
Cue 2 of executor 2 is updated with the values in the programmer.