# Guide de démarrage

Source: https://help.malighting.com/grandMA3/2.4/HTML/key_onpc_command_wing_quick_start-1-2.html
This is grandocs, an unofficial mirror of MA Lighting documentation. For authoritative or safety-relevant information, cite the canonical page on help.malighting.com.

---
![](/img/grandma3/2-4/img_gm3_command_wing_top_callouts-5567bf.png)

1. [Aire Master](/grandma3/2-4/do_control_master/)
2. [Dual encoder section](/grandma3/2-4/do_control_encoder/)
3. Aire Command
4. [Level wheel](/grandma3/2-4/do_control_level/)
5. Executor boutons 101-190 + 201-290
6. Executor faders 201-290
7. Executor boutons 301-390 + 401-490
8. Executor rotatifs 301-390 + 401-490

Pour plus d'information, voir la section [Executor elements](/grandma3/2-4/do_control_executor/) dans le [Mode d'emploi](https://help.malighting.com/grandMA3/2.4/HTML/help.html).

![](/img/grandma3/2-4/img_gm3_onpc-command-wing_rear_callout_white-63ab2d.png)

_grandMA3 onPC command wing _panneau arrière

1. [DMX A, B, C](/grandma3/2-4/fs_connect_dmx/)
2. [MIDI In+Out](/grandma3/2-4/fs_connect_midi/)
3. [DC Remote Control](/grandma3/2-4/fs_connect_dc_remote_in/)
4. [LTC](/grandma3/2-4/fs_connect_smpte_ltc/)
5. Interrupteur de courant
6. [Connecteur IEC](/grandma3/2-4/fs_connect_power/)
7. [Lumière d'appoint](/grandma3/2-4/si_desklights/)
8. Kensington lock
9. [Line In+Out](/grandma3/2-4/do_connector_pin_assignment/)
10. [Ethernet 1+2](/grandma3/2-4/fs_connect_ethernet/)
11. [USB 2.0](/grandma3/2-4/fs_connect_usb/)
12. [USB 3.0](/grandma3/2-4/fs_connect_usb/)
13. [DisplayPort 1-4](/grandma3/2-4/fs_connect_external_screens/)

### Branchement et mise sous tension de l’appareil 

1. Déballer l'appareil.
2. Enlever le matériel de protection. 
3. Placer l’appareil à l’intérieur sur une surface stable. 
4. Télécharger le logiciel grandMA3 onPC sur [www.malighting.com](https://help.malighting.com/grandMA3/2.4/HTML/www.malighting.com)
5. Installer le logiciel sur votre PC ou votre laptop. Pour connaitre la configuration minimale requise pour votre system voir [System Requirements](/grandma3/2-4/onpc_system_requirements/) dans le manuel utilisateur de la grandMA3. 
6. Brancher la command wing grandMA3 à votre PC ou laptop en utilisant un câble USB.
7. Démarrer la console grandMA3 ou le logiciel grandMA3 onPC. 
8. Allumer la command wing grandMA3 onPC: \
   -Insérer le connecteur IEC au branchement correspondant. \
   -Brancher la prise principale de courant.\
   -Allumer l’interrupteur de courant:\
   -Mettre en position **I**. \
   -L'interrupteur s’illumine en rouge.

Pour éteindre la command wing grandMA3 onPC, mettre l’interrupteur en position **O**. 

|                                                  |                                                                                                                                                                |
| ------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| ![](/img/grandma3/2-4/important_gray-89eed8.png) | **Important:** -Les données sont enregistrées seulement dans le logiciel de grandMA3 onPC. -Pour les mises à niveau, utiliser le logiciel grandMA3 onPC . |

|                                                  |                                                                                                                                                                                   |
| ------------------------------------------------ | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| ![](/img/grandma3/2-4/important_gray-89eed8.png) | **Important:** Vous pouvez déconnecter la command wing grandMA3 onPC en utilisant le logiciel de la grandMA3 onPC. La sortie DMX sera alors interrompue immédiatement.  |

### Différentes Combinaisons

| Appareil                     | Branché à                                   | Paramètres |
| ---------------------------- | ------------------------------------------- | ---------- |
| grandMA3 onPC command wing + | PC/laptop                                   | 4 096      |
| grandMA3 onPC command wing + | PC/laptop + grandMA3 onPC 8/4/2Port Node    | 4 096      |
| grandMA3 onPC command wing + | PC/laptop + grandMA3 processing unit M/L/XL | 4 096      |

|                                                  |                                                                                                                             |
| ------------------------------------------------ | --------------------------------------------------------------------------------------------------------------------------- |
| ![](/img/grandma3/2-4/important_gray-89eed8.png) | **Important:** Peu importe les appareils branchés au logiciel grandMA3 onPC, le nombre de paramètres ne peut excéder 4 096. |

Pour plus d'information, voir: [Expand the Amount of Parameters topic](/grandma3/2-4/system_parameter_expand/).