# Wings & Nodes Diagnosis

Source: https://help.malighting.com/dot2/en/help/key_window_wingsandnodesdiagnosis.html
This is grandocs, an unofficial mirror of MA Lighting documentation. For authoritative or safety-relevant information, cite the canonical page on help.malighting.com.

---
To open the **Wings & Nodes Diagnosis Window**, press Tools and tap Wings & Nodes Diagnosis.

![](/img/dot2/dot2_viewsandwindows_wingstatistics01_1-1-3-bebab4.png)_Figure 1: Wings & Nodes Diagnosis Window_

The Wings & Nodes Diagnosis Window is useful if technical support is needed.

The Wings & Nodes Diagnosis displays the connection status of the console, wing, or Node4.\
To select a type, tap in the table. The row of a selected type has a blue background.

The table has four columns:

**Type:**\
Displays the type.

**IP Address:**\
Displays the IPv6 address.

**Status:**\
Displays the connections status e.g. connected, not connected or downloading firmware.

**Connections:**\
Displays the amount of connections.

You can also identify every device in the network.\
Select the device in the table, and tap at the **frame icon** ![](/img/dot2/dot2_viewsandwindows_wingstatistics02_1-1-2847f2.png) in the title bar.\
An orange frame starts to flash on the screen of the selected device.

To leave the Wing Setup Window, tap ![](/img/dot2/dot2_viewsandwindows_controlelements_titlebar08_1-0-5c7c42.png) in the title bar or press Esc on the console.

## Details Area

The details area displays details regarding the selected type.

## Encoder Bar Functions

![](/img/dot2/dot2_viewsandwindows_cuesview01_1-0-82fd0e.png)_Figure 2: Wings & Nodes Diagnosis Encoder Bar_

**Scroll:**\
To scroll in the table up or down, turn the encoder left or right.